Cheap Ad-blue-obd2 Emulator for Volvo/Scania/Renault/MAN/IVECO/DAF/BENZ/FORD Trucks
Ad-blue-obd2 is a Plug & Drive Ready device to emulate working ad-blue systems and NOx sensors on Trucks, which equipped with EURO 4/5 catalytic converter systems, even with damaged ad-blue SCR system.
Ad-blue/DEF (Diesel Exhaust Fluid) is used to reduce NOx emissions in vehicles. We recommend you to use ad-blue/DEF fuel. You can use this device, if you are unable to find a station to fuel up your ad-blue/DEF tank.
Top 5 Reasons to Get Ad-blue-obd2 Emulator for Trucks:
1. Ad-blue-obd2 is very easy to install. Just Plug it into OBD2 connector of truck or bus and remove the fuses mentioned.
2. Ad-blue-obd2 will override Ad-blue system instantly, it will stop the usage of ad-blue liquid and disable Nox sensors.
3. Without any power loss of the engine or any warnings on the dashboard and in diagnostic system.
4. Ad-blue-obd2 does not damage the engine and not cause any negative effects to the truck factory setting.
5. Ad-blue-obd2 does not change any of the settings permanently. To turn back to the truck's original settings, just unplug Ad-blue-obd2 from OBD2 connector.
Installation and Calibration:
1. Pull the Key out from the ignition.
2. Remove the following Fuses (Volvo) F10, Fuses (SCANIA) Terminal- 42, (Renault) 25A P59, (MAN) 894 - 737 - 738, (IVECO) Terminal - 5 Terminal - 15, (DAF) 6 - 15A E357 - 20A, (MERCEDES BENZ) F1, (FORD) Terminal - 15 Terminal - 30
3. Plug Ad-blue-obd2 into OBD2 connector
4.Turn on the ignition and check the level of ad-blue, if it shows 50% or 70%.
5. If any fault light appears on dashboard, delete via service scanner.
Package including:
1pc x Ad-blue-obd2 Emulator Box Interfacer
Ad-blue-obd2 is a Plug & Drive Ready device to emulate working ad-blue systems and NOx sensors on Trucks, which equipped with EURO 4/5 catalytic converter systems, even with damaged ad-blue SCR system.
Ad-blue/DEF (Diesel Exhaust Fluid) is used to reduce NOx emissions in vehicles. We recommend you to use ad-blue/DEF fuel. You can use this device, if you are unable to find a station to fuel up your ad-blue/DEF tank.
Top 5 Reasons to Get Ad-blue-obd2 Emulator for Trucks:
1. Ad-blue-obd2 is very easy to install. Just Plug it into OBD2 connector of truck or bus and remove the fuses mentioned.
2. Ad-blue-obd2 will override Ad-blue system instantly, it will stop the usage of ad-blue liquid and disable Nox sensors.
3. Without any power loss of the engine or any warnings on the dashboard and in diagnostic system.
4. Ad-blue-obd2 does not damage the engine and not cause any negative effects to the truck factory setting.
5. Ad-blue-obd2 does not change any of the settings permanently. To turn back to the truck's original settings, just unplug Ad-blue-obd2 from OBD2 connector.
Installation and Calibration:
1. Pull the Key out from the ignition.
2. Remove the following Fuses (Volvo) F10, Fuses (SCANIA) Terminal- 42, (Renault) 25A P59, (MAN) 894 - 737 - 738, (IVECO) Terminal - 5 Terminal - 15, (DAF) 6 - 15A E357 - 20A, (MERCEDES BENZ) F1, (FORD) Terminal - 15 Terminal - 30
3. Plug Ad-blue-obd2 into OBD2 connector
4.Turn on the ignition and check the level of ad-blue, if it shows 50% or 70%.
5. If any fault light appears on dashboard, delete via service scanner.
Package including:
1pc x Ad-blue-obd2 Emulator Box Interfacer
